Subscribe Free
in Maintenance

CFM LEAP-1C integrated propulsion system achieves joint EASA/FAA certification

Posted 22 December 2016 · Add Comment

CFM International's advanced LEAP-1C integrated propulsion system has been awarded Type Certificates by both the European Aviation Safety Agency (EASA) and the U.S. Federal Aviation Administration (FAA), paving the way for entry into commercial service on the COMAC C919 aircraft.

CFM is unique in that it is the only engine manufacturer to gain dual original certification from both agencies, rather than one lead agency issuing a type certification and the second agency validating that certification. This reflects CFM’s 50/50 design and production structure between parent companies GE and Safran, which has been so successful for more than 40 years.

“It has been an incredible year for the LEAP program, culminating in the certification of the third model in this engine family,” said Allen Paxson, executive vice president for CFM.  “Everyone, from the project and engineering teams to manufacturing and our suppliers, has done an incredible job of keeping this program on schedule and building an engine that is delivering everything that we have promised.”

The LEAP engine was officially launched in December 2009 when COMAC selected the LEAP-1C as the sole Western powerplant for its 150-passenger C919 airplane. The engine incorporates a unique fully integrated propulsion system (IPS).

“It has been a real pleasure working in close coordination with COMAC on this program,” said Francois Bastin, executive vice president for CFM.  “The LEAP-1C is the only model for which CFM provides a totally integrated propulsion system that includes the engine, nacelle, and thrust reverser. The IPS, along with the pylon developed by COMAC, were all designed in conjunction with each other. As a result, the LEAP-1C features improved aerodynamics, lower weight, and easier maintenance. We think that our customers are going to be pleased with the airplane/engine combination.”

The LEAP-1C thrust reverser was developed by Nexcelle, a joint venture between Safran Nacelles and GE Aviation’s Middle River Aircraft Systems (MRAS).

In addition to the IPS, the LEAP-1C engine features some of the industry’s most advanced technologies, including 3-D woven carbon fiber composite fan blades and fan case; a unique debris rejection system; 4th generation three dimensional aerodynamic designs; the Twin-Annular, Pre-Swirl (TAPS) combustor featuring additively manufactured fuel nozzles; ceramics matrix composite shrouds in the high-pressure turbine; and titanium aluminide (Ti-Al) blades in the low-pressure turbine.

The first LEAP-1C engine successfully completed a flight test program in late 2014 on a modified 747 flying testbed at GE facilities in Victorville, California. In November 2015, the first C919 rolled out at COMAC facilities in Shanghai. More recently, COMAC successfully started the engines for the first time in early November 2016, running them for 10 minutes at ground idle power at the company’s Shanghai Pudong International Airport facility.

The LEAP engines currently in commercial service are providing operators with double-digit improvements in fuel consumption and CO2 emissions compared to today’s best CFM engine, along with dramatic reductions in engine noise and exhaust gaseous emissions. All this technology brings with it CFM’s legendary reliability and low maintenance costs.

 

* required field

Post a comment

Other Stories
Advertisement
Latest News

EBACE: TrueNorth new data link unit to improve fairground communications

Communication between pilots and ATC is set to improve following the introduction today at EBACE by TrueNorth, of a new FANS-1/A over Iridium data link unit (DLU) with voice capabilities.

Nextant Aerospace launches large cabin 604XT programme

Nextant Aerospace has announced the launch of a new cockpit avionics programme in conjunction with Rockwell Collins that will bring Pro Line Fusion to the Bombardier Challenger 604 aircraft platform.

FlightSafety International starts Master-level Advanced Training Courses for Dassault Falcon

FlightSafety International has announced the start of new Master-level Advanced Training Courses for the Dassault Falcon 2000EX EASy and 900EX EASy series aircraft.

EBACE: Airbus launches ACJ330neo at European show

Airbus has launched a private jet version of its A330neo at EBACE today. The new VVIP jet combines new-generation engines and aerodynamic and other improvements which the company said will deliver even more comfort, efficiency and true

EBACE: Supercar designer gives new look to Airbus ACJ319neo

Italian exotic car manufacturer Pagani Automobili is moving its design focus to the world of aircraft with a new cabin design for the ACJ319 neo.

Deer Jet to get second 787 DreamJet

Deer Jet is to introduce a second Boeing 787 Dream Jet to its fleet, making it the world's largest operator of the type.

EBACE17 SK0103240517
See us at
6th Annual Mediterranean Business AviationDIAC BT1105121117AIME BT1204240118DAS BT1105161117EBACE17 BT0103240517